Herunterladen Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

HHA162208
OPERATION WIRELESS MODE
Press and hold the POWER button for approximately 2 seconds to turn
"ON" the speaker. Press and hold this button again until the speaker
announces power "OFF", the speaker will then turn off. Press and hold
PLUS button to increase the volume. Press this button once to skip to
the next track. Press and hold MINUS button to decrease the volume.
Press this button once to skip to previous track. When the music is
playing, press the PLAY/PAUSE button once to pause the music. When
the music is paused, press the PLAY/PAUSE button once to play the
music. Press the LIGHT BULB button once to turn "ON" the ame
light. Press the LIGHT BULB button again to turn "OFF" the ame light.
[The speaker does not have to be turned on to use this feature.]
PAIRING
Once you have turned the speaker on, the speaker will automatically
enter into Wireless Mode'. Turn on the wireless on your media device
and search for the device name Hyundai - Flame BT Speaker. @ Click
to connect. While the speaker is searching and connecting, its blue
indicator light will begin to ash.
Once successfully connected, the speaker will produce a "DengDeng"
sound and its blue indicator light will stop ashing and hold a solid
light. You can then control the music using the control buttons on the
speaker or on your media device.
MAINTENANCE
Use a dry and soft cloth to clean the speaker. Please do not use any
liquids or abrasive chemicals to clean the speaker, doing so may
damage the speaker. Do not expose the speaker to direct heat,
water and light sources. Do not immerse the speaker in water. Adjust
the volume to a suitable level so as to avoid damaging your hearing,
or the speaker itself. If you do not intend to use the speaker for a long
period of time, please charge the battery once a month to extend the
lifespan of the battery.
CHARGING INSTRUCTION
Connect the provided USB charging cable into the speaker's charging
port. Then connect the USB into a computer or adapter's USB port.
The indicator light will show as red while the battery is charging. Once
the battery is fully charged, the indicator light will then turn "OFF".
FOR DOUBLE PAIRING
Turn "OFF" the wireless pairing on your media device. Then switch on
both speakers at the same time. You will hear the initial startup sound
of each speaker but please wait another 5-10 seconds or so for a
secondary "Di" sound - this means two speakers are paired together.
Turn wireless pairing "ON" on your phone and connect to one Hyundai
- Flame BT Speaker and you are all set to play music through both
speakers simultaneously.
NOTE:
Top white light is solid on the host speaker while powered on. Top
white light intermittently ashes on the second guest paired speaker
when powered on. When nished using the speakers and you turn off
the host speaker, the guest speaker will also turn off automatically.
Flame pole light with bluetooth speaker
FUNCTIONALITIES
1. Turn ON/OFF the light
2. Short press back to the last song,
Long press turn down the volume.
3. Bluetooth speaker ON/OFF switch
4. Short press turn to the next song,
Long press turn up the volume.
5. Play / Pause
ADDITIONAL INFORMATION
• Store the speaker in a cool, dry & ventilated area while charging.
• Do not dismantle the speaker.
• Only use the provided charging cable.
• Do not leave the speaker unattended while charging.
• Please remove the speaker from charge once the battery has fully
charged. Overcharging could damage the speaker.
TECHNICAL SPECIFICATIONS:
Wireless Version:
V5
Transmission Distance: <10M
Output Power:
5W
Power Supply:
DC 5V 1A
Battery:
Built-in Hi-Lithium 3.7V 1200mAh
Product Dimensions:
D 9.6 x 16.5 cm
© 2022 The Investment Company Europe B.V. HYUNDAI is a
trademark of HYUNDAI Corporation holdings, Korea. Licensed to The
Investment Company Europe B.V. All rights reserved.
Licensed by HYUNDAI Corporation holdings, Korea. Imported/
Distributed by The Investment Company Europe B.V. exclusively
developed for sales in the Netherlands, Belgium, and Luxembourg.
The artwork and design of this package are protected by European
copyright law and may not be reproduced, distributed, displayed,
published or used for any purpose without prior written permission.
It is not permitted to alter, or reproduce any trademarks or copyright
User Manual
PATENT PENDING
notice from this package.
NL / EN - www.alleenonline.nl
BE / FR - www.alleenonline.be
loading

Inhaltszusammenfassung für Hyundai HOL362001

  • Seite 1 Once you have turned the speaker on, the speaker will automatically enter into Wireless Mode’. Turn on the wireless on your media device and search for the device name Hyundai - Flame BT Speaker. @ Click to connect. While the speaker is searching and connecting, its blue indicator light will begin to ash.
  • Seite 2 Schakel draadloos koppelen op uw telefoon in door de Europese auteursrechtwetgeving en mogen niet worden en maak verbinding met één Hyundai - Flame BT-luidspreker en u bent gereproduceerd, gedistribueerd, weergegeven, gepubliceerd of helemaal klaar om muziek via beide luidsprekers tegelijk af te spelen.
  • Seite 3 Lautsprecher automatisch in den Wireless-Modus. Schalten Sie das WLAN auf Ihrem Mediengerät ein und suchen Sie nach dem Gerätenamen Hyundai – Flame BT Speaker. @ Zum Verbinden klicken. Während der Lautsprecher sucht und eine Verbindung herstellt, beginnt seine blaue Kontrollleuchte zu blinken. Nach erfolgreicher Verbindung gibt der Lautsprecher einen „DengDeng“-Ton von sich und seine blaue...
  • Seite 4 Une fois que vous avez allumé le haut-parleur, le haut-parleur entrera automatiquement en mode sans l ». Activez le sans l sur votre appareil multimédia et recherchez le nom de l’appareil Hyundai - Flame BT Speaker. @ Cliquez pour vous connecter. Pendant que l’enceinte recherche et se connecte, son voyant bleu commence à...