Werbung
SETTING THE RELATIVE HUMIDITY SET POINT
TTING THE RELATIVE HUMIDITY SET POINT
Use the UP and DOWN arrows to set the desired target relative humidity level.
e the UP and DOWN arrows to set the desired target relative humidity level.
CHECKING THE RELATIVE HUMIDITY SET POINT
CHECKING THE RELATIVE HUMIDITY SET POINT
Press either the UP or DOWN arrow once, to check what the target relative humidity
CKING THE RELATIVE HUMIDITY SET POINT
level has been set to.
Press either the UP or DOWN arrow once, to check what the target relative humidity
either the UP or DOWN arrow once, to check what the target relative humidity
level has been set to.
has been set to.
FAN SPEED OPTIONS
FAN SPEED OPTIONS
Press the Fan Speed button quickly to choose between one of three different fan
SPEED OPTIONS
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Press the Fan Speed button quickly to choose between one of three different fan
Speed 1 – Low.
s the Fan Speed button quickly to choose between one of three different fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
ds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Speed 1 – Low.
ed 1 – Low.
FAN SPEED OPTIONS (CONTINOUS)
FAN SPEED OPTIONS (CONTINOUS)
Hold down the Fan Speed button for five seconds to switch between the following
SPEED OPTIONS (CONTINOUS)
modes:
Hold down the Fan Speed button for five seconds to switch between the following
1 – ON – the dehumidifier will continue to run continuously even once the target
down the Fan Speed button for five seconds to switch between the following
modes:
humidity level has been reached (this is the default setting).
es:
1 – ON – the dehumidifier will continue to run continuously even once the target
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
ON – the dehumidifier will continue to run continuously even once the target
humidity level has been reached (this is the default setting).
been reached.
dity level has been reached (this is the default setting).
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
OFF – the dehumidifier will stop running once the target relative humidity level has
been reached.
reached.
SETTING THE RELATIVE HUMIDITY SET POINT
ZIELWERT DER RELATIVEN LUFTFEUCHTIGKEIT FESTLEGEN
SETTING THE RELATIVE HUMIDITY SET POINT
SETTING THE RELATIVE HUMIDITY SET POINT
SETTING THE RELATIVE HUMIDITY SET POINT
SETTING THE RELATIVE HUMIDITY SET POINT
SETTING THE RELATIVE HUMIDITY SET POINT
Use the UP and DOWN arrows to set the desired target relative humidity level.
SETTING THE RELATIVE HUMIDITY SET POINT
Verwenden Sie die Pfeiltasten NACH OBEN und NACH UNTEN, um den gewünschten
Use the UP and DOWN arrows to set the desired target relative humidity level.
Use the UP and DOWN arrows to set the desired target relative humidity level.
Use the UP and DOWN arrows to set the desired target relative humidity level.
Use the UP and DOWN arrows to set the desired target relative humidity level.
Use the UP and DOWN arrows to set the desired target relative humidity level.
Zielwert für die relative Luftfeuchtigkeit einzustellen.
Use the UP and DOWN arrows to set the desired target relative humidity level.
Prüfen Sie die relative
Luftfeuchtigkeit
Prüfen Sie
die relative
Luftfeuchtigkeit,
indem Sie
drücken
CHECKING THE RELATIVE HUMIDITY SET POINT
ZIELWERT DER RELATIVEN LUFTFEUCHTIGKEIT KONTROLLIEREN
CHECKING THE RELATIVE HUMIDITY SET POINT
CHECKING THE RELATIVE HUMIDITY SET POINT
CHECKING THE RELATIVE HUMIDITY SET POINT
CHECKING THE RELATIVE HUMIDITY SET POINT
Press either the UP or DOWN arrow once, to check what the target relative humidity
CHECKING THE RELATIVE HUMIDITY SET POINT
Press either the UP or DOWN arrow once, to check what the target relative humidity
Press either the UP or DOWN arrow once, to check what the target relative humidity
Press either the UP or DOWN arrow once, to check what the target relative humidity
Press either the UP or DOWN arrow once, to check what the target relative humidity
Drücken Sie einmal auf den Pfeil NACH OBEN oder NACH UNTEN, um zu prüfen,
level has been set to.
level has been set to.
level has been set to.
level has been set to.
Press either the UP or DOWN arrow once, to check what the target relative humidity
level has been set to.
auf welchen Wert die relative Zielfeuchtigkeit eingestellt wurde.
level has been set to.
FAN SPEED OPTIONS
GESCHWINDIGKEITSSTUFEN
FAN SPEED OPTIONS
FAN SPEED OPTIONS
FAN SPEED OPTIONS
FAN SPEED OPTIONS
SETTING THE RELATIVE HUMIDITY SET POINT
SETTING THE RELATIVE HUMIDITY SET POINT
Press the Fan Speed button quickly to choose between one of three different fan
FAN SPEED OPTIONS
Press the Fan Speed button quickly to choose between one of three different fan
Press the Fan Speed button quickly to choose between one of three different fan
Press the Fan Speed button quickly to choose between one of three different fan
Drücken Sie die Geschwindigkeitstaste schnell, um zwischen diesen drei verschiedenen
Press the Fan Speed button quickly to choose between one of three different fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Use the UP and DOWN arrows to set the desired target relative humidity level.
Use the UP and DOWN arrows to set the desired target relative humidity level.
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Gebläsestufen zu wählen: niedrig (1), mittel (2) und hoch (3). Die Standardeinstellung für
Press the Fan Speed button quickly to choose between one of three different fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Speed 1 – Low.
Speed 1 – Low.
Speed 1 – Low.
Speed 1 – Low.
die Geschwindigkeitsstufe ist die Lüftergeschwindigkeit 1 – Niedrig.
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Speed 1 – Low.
Speed 1 – Low.
Drücken Sie kurz
auf
Geschwindig-
keitseinstellung
zu gelangen
GESCHWINDIGKEITSOPTIONEN (DAUERBETRIEB)
FAN SPEED OPTIONS (CONTINOUS)
FAN SPEED OPTIONS (CONTINOUS)
FAN SPEED OPTIONS (CONTINOUS)
FAN SPEED OPTIONS (CONTINOUS)
FAN SPEED OPTIONS (CONTINOUS)
Hold down the Fan Speed button for five seconds to switch between the following
FAN SPEED OPTIONS (CONTINOUS)
CHECKING THE RELATIVE HUMIDITY SET POINT
CHECKING THE RELATIVE HUMIDITY SET POINT
Halten Sie die Taste für die Gebläsestufe fünf Sekunden lang gedrückt, um zwischen
Hold down the Fan Speed button for five seconds to switch between the following
Hold down the Fan Speed button for five seconds to switch between the following
Hold down the Fan Speed button for five seconds to switch between the following
Hold down the Fan Speed button for five seconds to switch between the following
modes:
den folgenden Modi zu wechseln:
modes:
modes:
modes:
Hold down the Fan Speed button for five seconds to switch between the following
modes:
Press either the UP or DOWN arrow once, to check what the target relative humidity
Press either the UP or DOWN arrow once, to check what the target relative humidity
1 – ON – the dehumidifier will continue to run continuously even once the target
1 – ON – the dehumidifier will continue to run continuously even once the target
1 – ON – the dehumidifier will continue to run continuously even once the target
1 – ON – the dehumidifier will continue to run continuously even once the target
modes:
1 – ON – the dehumidifier will continue to run continuously even once the target
level has been set to.
level has been set to.
humidity level has been reached (this is the default setting).
1. EIN - der Luftentfeuchter läuft kontinuierlich weiter, auch wenn die Zielfeuchtigkeit
humidity level has been reached (this is the default setting).
humidity level has been reached (this is the default setting).
humidity level has been reached (this is the default setting).
1 – ON – the dehumidifier will continue to run continuously even once the target
humidity level has been reached (this is the default setting).
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
bereits erreicht wurde (Standardeinstellung).
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
humidity level has been reached (this is the default setting).
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
been reached.
2. AUS - der Luftentfeuchter schaltet ab, sobald die gewünschte relative
been reached.
been reached.
been reached.
2 – OFF – the dehumidifier will stop running once the target relative humidity level has
been reached.
Luftfeuchtigkeit erreicht wurde.
been reached.
FAN SPEED OPTIONS
FAN SPEED OPTIONS
Press the Fan Speed button quickly to choose between one of three different fan
Press the Fan Speed button quickly to choose between one of three different fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
speeds: low (1), medium (2) and high (3). The default setting for the fan speed is Fan
Speed 1 – Low.
Speed 1 – Low.
Relative
Luftfeuchtigkeit
oder
Drücken Sie
um zur
oder
zwischen den Stufe
1/2/3 zu wählen
9
[EN]
Betätigen Sie
erneut
oder
um die relative
Luftfeuchtigkeit
einzustellen
um
9
9
[EN]
9
[EN]
9 [DE]
9
[EN]
9
9
[EN]
[EN]
9
[EN]
[EN]
9
[EN]
Werbung
