Minebea Intec Midrics Option Y2 Installations- Und Sicherheitshinweise Seite 7

Ground (Earth)
§ The display and control unit must be grounded.
To do this, connect the grounding conductor to the ground terminal.
Installation:
– Toothed lock washer
– Cable
– Toothed lock washer
– Nut
– Locknut
§ The display and control unit must also be grounded.
To do this, connect the grounding conductor to the ground terminal.
Use a locknut if necessary.
Connecting the Scale to AC Power
Make sure that the voltage rating printed on this unit is identical to your local line
!
voltage. If the voltage specified on the label does not match the rating or standard
you use, please contact your Minebea Intec office or dealer.
Make sure to observe the safety instructions.
!
§ Connect the equipment to AC power.
Installation Instructions and Safety Information 7