EMAG EMMI-DENTAL PROFESSIONAL Bedienungsanleitung Seite 12

®
emmi-dental
PROFESSIONAL
®
emmi-dent 6
PROFESSIONAL
1
Connect the charging
station with the socket.
4
Briefl y wet the bristles of the ultrasound
attachment under running water.
6
Lightly spread the toothpaste
over the inside and outside of
your teeth with the bristles of
the ultrasound attachment.
9
You can simply plug the device with inserted ultrasound attach-
ment into the charging station again after dental micro cleaning
– or if you are for instance travelling, you can operate the device
for ca. 10 days without recharging, if the batteries are fully charged
(after ca. 24 hours of charging time).
Dental Micro Cleaning with Real Ultrasound
It functions so simply!
2
Insert the handpiece from
above into the charging
station (charging time: ca.
24 hours)
7
Then hold the bristles motionless on the teeth, slightly
from inside, outside and from above (chewing surface)
– without applying pressure – for ca. 5 to 10 seconds.
The bristles of the ultrasound attachment each cover 2-3
teeth. The actual retention time depends on the degree
of impurity of the teeth.
5
Apply only Ultrasound Toothpaste (the formation
of millions of micro-bubbles only functions with
this) to the bristles (approximately twice the size
of a pea).
8
10
If you clean your teeth twice a day, please replace the ultra-
sound attachment after 3 months.
3
Now insert the ultrasound at-
tachment vertically from above
into the handpiece and turn on
the device.
After completion of dental cleaning
(while the device is turned on),
briefl y rinse the bristles and
handpiece under running water,
turn the device off and briefl y dry
the handpiece (not the bristles).
Ultrasound automatically disinfects
the bristles.