Bluetooth Pairing - Akko Mod007B He Benutzerhandbuch

Switching Operating Systems
The keyboard features a physical switch located to the right of the Caps Lock key, allowing you to
toggle between macOS and Windows modes.
Switch Position
Top Position
Middle Position
Bottom Position
This ensures proper key mapping and seamless operation for the selected operating system.

Bluetooth Pairing

Activate Bluetooth Mode:
•
Press Fn + E/R/T to select one of the three Bluetooth channels for pairing. Each key
corresponds to a separate device:
o E: Device 1
o R: Device 2
o T: Device 3
•
Hold the selected key combination (Fn + E/R/T) for 3 seconds to enter pairing mode. The
blue indicator light will flash rapidly, signaling that the keyboard is ready to pair.
Pair with Your Device:
•
Open the Bluetooth settings on your device, locate the keyboard in the list of available
devices, and select it to establish a connection.
Confirmation of Successful Pairing:
•
The blue indicator light will stay on for 2 seconds and then turn off, confirming the
connection.
•
If pairing is not completed within 30 seconds, the indicator light will turn off, and the
keyboard will automatically enter sleep mode to conserve power.
2.4G Wireless Pairing
Activate 2.4G Mode:
•
Press Fn + Y to switch the keyboard to the 2.4G wireless channel.
Enter Pairing Mode:
•
Hold Fn + Y for 3 seconds to enable pairing mode. The green indicator light will flash rapidly
to signal that the keyboard is ready to connect.
Mode
macOS Mode (built-in power supply on).
Default Windows Mode (built-in power supply off).
Windows Mode (built-in power supply on).
12