Herunterladen Inhalt Inhalt Diese Seite drucken

Exemple Console De L'assistant Dell Easy Setup - Dell N20 serie Handbuch Zum Einstieg

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 134

Exemple console de l'Assistant Dell Easy Setup

L'exemple suivant montre une suite d'invites et de réponses affichées dans
l'Assistant Dell Easy Setup. Les valeurs utilisées sont indiquées ci-dessus.
Au démarrage du commutateur (après l'auto-test de démarrage), la boîte de
dialogue suivante s'affiche :
Unit 1 - Waiting to select management unit)>
(Unité 1 – En attente de sélection d'une unité
de gestion)
Applying Global configuration, please wait ...
(Application de la configuration globale, veuillez
patienter...)
Welcome to Dell Easy Setup Wizard (Bienvenue dans
l'Assistant Dell Easy Setup)
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. (L'Assistant de configuration vous guide
au cours de la configuration initiale du commutateur
et vous permet une mise en route aussi rapide que
possible.) You can skip the setup wizard, and enter
CLI mode to manually configure the switch. (Vous
pouvez passer cet assistant et entrer en mode CLI afin
de configurer manuellement le commutateur.) You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. (Vous devez répondre à la question
suivante dans les 60 secondes pour exécuter
l'Assistant de configuration, sinon le système va
utiliser la configuration système par défaut et
poursuivre son fonctionnement normal.) Note: You can
exit the setup wizard at any point by entering
[ctrl+z]. (Remarque : vous pouvez quitter l'assistant
de configuration à tout moment en appuyant sur
[ctrl+z].)
124
Guide de mise en route

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

N30 serie

Inhaltsverzeichnis