Midland R Serie Installation Seite 2

MOUNTING KIT
Place the intercom device on the
left side of your helmet using the
adhesive mount or the clamp
mount.
Adhesive mount
Clean the surface and keep
pressed for 10 seconds to fix the
mount.
Clamp mount
Lock
Overlap and slide downwards.
Unlock
Press (with a pointed object) and
slide upwards.
SPEAKERS
The speakers' positioning is the
most important point of the
installation procedure.
Attention: for the best sound
clarity it is very important to
place the speakers in correspon-
dance with the centre of your
ears and as close as possible
(the speakers must almost touch
your ears). In case of need, use
the supplied spacers to better fit
the speakers closer to your ears.
The recesses of the speakers
designed into the helmets are
not always placed in the best
location for you. Please be sure
to fix speakers properly.
MICROPHONES
Wired microphone for full face
helmets: place the microphone
in front of your mouth.
Boom microphone for modular/
jet helmets: fix the mike on the
left side and keep the sponge
as closely as possible to your
mouth (white symbol in front of
your mouth).
A
LOCK/UNLOCK
To fix the intercom device to the
MAGic LOCK mount:
Insert at first the rear side of the
unit into the mount by tilting the
unit of 45° and then bring nearer
the fore side: the strong magnet
will lock safely the device.
To unlock the intercom device:
press the button on the bottom
side of the clip (A) and pull out
the device.
A