Snooze Function - Ecg Rd 110 Dab Bedienungsanleitung

9. "Sound" is displayed, confirm the alarm sound source: Tone (beeping), FM or DAB
(radio).
10. In the next step, select the repetition: once only (no repetition), Weekdays,
Weekends, Daily.
GB
11. In the last step of the wizard, select the alarm volume and confirm with ENTER.
12. Now the alarm is set, "Alarm set" is displayed and an indicator in the form of a bell
icon and the active alarm number appears on the home screen.

SNOOZE FUNCTION

After activating the alarm, during the ringing, you can press Snooze to cancel the alarm
and move it by 9 minutes until you turn the alarm off with the ON / OFF button.
To permanently cancel the alarm, you need to change the alarm setting from On to Off
mode. Follow steps 1-6 above. Change the setting to Off and confirm.
ADVANCED DAB + OPTIONS
1. Hold down the MENU/INFO button to select the information to be displayed on the
screen. For example: signal strength, frequency, time and date.
2. Hold down the MENU/INFO button to enter the menu. Here you have the following
options to choose from, which you can navigate between using the buttons /:
Complete Scan (Searches for DAB+ stations), Manual Tuning (Manually tunes DAB+
stations), DRC (Limits the volume difference between stations), Remove Invalid
(Removes all stations with a weak signal), System (Changes system settings)
ADVANCED FM OPTIONS
1. Hold down the MENU/INFO button to select the information to be displayed on
the screen.
2. Hold down the MENU/INFO button to enter the menu. Here you have the following
options to choose from, which you can navigate between using the buttons /:
Scan Settings (All Stations/Strong Signal Stations Only), Audio Settings (Stereo On/
Mono Only), System (Change System Settings)
CHANGE SYSTEM SETTINGS
1. Hold down the MENU / INFO button to enter the menu.
Select "System" and press Enter to confirm.
2. Press / to select: Auto Power Off (Automatically turns off the radio after the
set time has elapsed), Time (Set the time, see above), Alarm (Manage alarms, see
above), Default Power On Volume (Set the default volume), Aut. backlight (Sets the
time after which the display backlight automatically turns off ), Language (Sets the
system language), Factory Defaults (Sets the unit to the default settings; CAUTION,
this option clears all presets), Software Version (Displays the installed software
version).
8