Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- In order to avoid fire risk, wherever possible, ensure that the appliance
is not in contact with walls or with any hot element (compressor,
condenser). Observe the installation recommendations.
- The appliance should not be placed close to radiators or cooking hot
plates or gas rings.
- Check that electrical sockets remain accessible when the appliance is
Installed.
Power saving
To limit the electricity consumption of your appliance:
- Install it in an appropriate place (see "Installing your appliance").
- Leave the doors open as little time as possible.
- To ensure that the appliance operates properly, clean the
condenser regularly (see "Routine servicing of your appliance").
- Regularly inspect the door seals and ensure that they are still
closing properly. If this is not the case, contact your after-sales
service.
- The shelves placed in manufacturer mode is the most efficient use of
energy for this refrigerating appliance. Use the shelves provided by
manufacturer, never block the holes on the shelves or use other type of
shelves not authorized by manufacturer which may cause poor cooling
8
Werbung
