Hilti DGH 130 Bedienungsanleitung Seite 23

Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in the
reproduction of the declaration of conformity.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration information
Vibration emission value, diamond cup wheel (a
Vibration emission value, fine-grinding (a
Uncertainty (K)
5 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Installing the accessory tool with the Keyless quick-release lock nut
CAUTION
Risk of damage and risk of injury due to damaged Keyless quick-action clamping screw. The Keyless
quick-action clamping screw can snap off if it is overtightened.
▶ Never use a tool to tighten the Keyless quick-action clamping screw. Tighten it by hand only.
Use only accessory tools approved for a speed at least equal to the rated speed stated on the device.
1. Switch off the power tool.
2. Unplug the supply cord from the power outlet.
3. Clean the clamping flange and the quick-release lock nut.
4. Fit the clamping flange to the arbor.
5. Fit the accessory tool.
6. Press and hold down the spindle lock button.
7. Screw the Keyless quick-release lock nut down until it is seated on the accessory tool, then tighten it
firmly so that it is secure.
8. Then release the arbor lock button.
5.2 Removing the accessory tool with the Keyless quick-release lock nut
1. Switch off the power tool.
2. Unplug the supply cord from the power outlet.
3. Press and hold down the arbor lockbutton.
4. Release the Keyless quick-release lock nut by turning the quick-release lock nut counter-clockwise by
hand.
5. Release the arbor lockbutton and remove the accessory tool.
*2204296*
)
)
WA
)
pA
)
pA
)
h
2204296
96 dB(A)
3 dB(A)
88 dB(A)
3 dB(A)
) 3.6 m/s²
h
3.1 m/s²
1.5 m/s²
English 19