Controls And Electrical Connections - Key Automation Icon Ico10130 Anleitungen Und Hinweise Zu Installation Und Einsatz

EN

2 - CONTROLS AND ELECTRICAL CONNECTIONS

The spotlight is equipped with an integrated wiring system, fe-
aturing a 2-pin male connector (fig. 2a) to interface with the wi-
ring already
Additionally, it comes with an extra wiring, featuring a 2-pin female connec-
tor (fig. 2b), which, once connected to the integrated wiring, allows it to be
adapted to any existing system.
Fig. 2
2a
If using
ICO10140), observe the power supply polarity indicated in Fig. 2.
If using the adjustable color temperature model (ICO101TU), the spotlight
can be powered with red-positive and black-negative (resulting in a color
temperature of 3000 K) or black-positive and red-negative (4000 K). To
adjust the temperature to intermediate values, it is necessary to inter-
face with one of the Key Automation CPL series lighting controllers.
For all models, the luminous flux is dimmable via PWM.
In the case of parallel connections (fig. 3), the maximum number of spot-
lights that can be connected is 10, and the cross-section of the backbone
wiring should not be less than 2x0.4 mm² (AWG 21).
Fig. 3
6
integrated
-
+
the fixed color
24 Vdc
1
into some pergola
-
+
temperature
MAX 10
2
lighting
-
+
2b
models (ICO10130
9 10
systems.
or