Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FAULT
Dishwasher detergent
residues in the
detergent container
Increased foaming
Noises
Codes/programme
display
E1
E3
E4
EC
E8
EC
Ed
POSSIBLE CAUSE
The detergent was not
completely rinsed out due to
blocked spray arms
Detergent container was
moist when filling the
detergent
Spilled rinsing agent
Used dishwasher detergent
or machine care products
form too much foam.
Noises during the washing
programme are normal.
Meaning
Prolonged water supply time
Washing programme
temperature is not reached
Flooding
Error in the flushing control
system
Incorrect alignment of the
distributor valve.
Drain pump defective
Electronics pcb has failed
REMEDY
Ensure that spray arms can
rotate freely
Only fill the detergent into the
dry detergent container.
Remove rinsing agent with a
cloth.
Change dishwasher detergent
These noises are caused by
the gentle removal of food
residues and the opening of
the detergent container.
Possible cause and remedy
Tap is not properly turned on
or water pressure is too low.
Water connection tap is
scaled. Commission an
plumber for checking.
Customer service work will be
charged in this case.
Heating element is defective.
Contact After Sales Service.
Some parts of the appliance
may have leaks.
Contact After Sales Service.
Defective circuit board
Failure of the drain pump or
motor.
Open circuit or rupture of the
distribution valve.
Contact After Sales Service.
Power circuit interrupted.
Contact After Sales Service.
Werbung
