Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connect the drain hose.
1. Ensure that the drain hose is not kinked or pinched.
→ The waste water must be able to drain unhindered.
➢ Do not insert sink plug While the appliance is pumping out the water,
do not insert sink plug, the water could flow back.
(a) Connect the drain hose to a floor drain. Observe the minimum connection height
of 400mm.
(b) Direct connection to the siphon of a washbasin/sink. The maximum connection
height of ≤ 1000 mm must be observed. Connection should only be carried out
by a specialist.
(c) Floor drain diameter
Hose extension
•
Only use an identical drain hose as a hose extension and have it professionally
installed. Contact After Sales Service.
•
In order not to affect the cleaning power of the dishwasher, the hose extension
must not be longer than 2 m.
16.2 Electrical connection
The prerequisite for the electrical connection is a professionally installed protective
contact socket with its own adequate fuse protection (220-240V~/50 Hz/10A). The use of
a pulse-sensitive fault-current circuit breaker (RCD switch) is recommended.
DANGER
ELECTRIC SHOCK HAZARD!
The appliance must be earthed according to the local regulations. For this purpose, the
plug of the connecting cable is fitted with a contact provided for this purpose.
WARNING
FIRE HAZARD
Do not connect the appliance to a multiple socket, power strip or similar.
➢ If the plug does not fit into the plug socket, contact a
qualified electrician.
➢ Do not use an extension cable with an adapter plug
for this appliance.
Werbung
