Belden HIRSCHMANN GREYHOUND GRS105 Referenzhandbuch Seite 263

Netzsicherheit
[ Netzsicherheit > MACsec > Port-Information ]
Empfang SC empfangen
Displays whether the device is actively receiving and processing MACsec-protected data packets
using the established receive SC.
Empfang SA nächster PN
Displays the next sequential PN that the device expects for receiving MACsec-protected data
packets using the current SA. The device checks the PN to verify that each received packet is
unique, which helps prevent replay attacks.
Empfang SA AN
Displays a 2-bit identifier that recognizes the currently active SA. The device uses this SA to verify
the incoming MACsec-protected data packets. This lets you identify whether the device uses the
specified security key for the authentication and decryption of incoming data packets or not.
[Port-Statistiken]
This tab lets you view the statistics for the SAKs and MACsec Key Agreement Protocol Data Units
(MKPDUs) transmitted between the device and its peer on a MACsec-capable physical port.
Table
For information on how to customize the appearance of the table, see
Seite 18.
Buttons
Port-Statistiken leeren
Resets the values in the following columns for the selected port:
•
Erzeugte SAKs
•
Neu verschlüsselte SAKs
•
Empfangene SAKs
•
Empfangene SAKs Antworten
•
MKPDUs Validiert und Rx
•
Gesendete MKPDUs
•
Verteilte SAK
Interface
Displays the number of the MACsec-capable physical port.
262
„Arbeiten mit Tabellen" auf
RM GUI GRS106
Release 10.3 04/2025