Specifications - Canon GP-E2 Bedienungsanleitung

Specifications

Compatible cameras
Geotagging images
Reception frequency
Positioning interval
Logging mode
Time adjustment
Digital compass
Interface
Power supply
Dimensions
Weight
Operating temperature 0°C to +40°C / 32°F to 104°F
Operating humidity
GP-E2 software
All information in this manual is based on Canon testing standards.
Receiver specifications and appearance are subject to change without notice.
EOS DIGITAL cameras
* Cameras with [GPS device settings] menu item: All
features available
* Cameras without [GPS device settings] menu item:
<LOG> mode available
Latitude, longitude, elevation, direction,
Coordinated Universal Time (UTC) and signal
acquisition status
* GPS-compatible cameras allow images to be
geotagged during shooting (cameras that cannot use
the receiver's digital compass cannot tag the
shooting direction)
* GPS-incompatible cameras: Map Utility can be used
for geotagging (based on log information)
1575.42 MHz (L1 band)
1, 5, 10, 15, or 30 seconds, or
1, 2, or 5 minutes
NMEA-0183
One file per day, based on UTC
Camera time can be set from GPS time data
Triaxial geomagnetic sensor and triaxial
acceleration sensor used to calculate direction
(some cameras do not support this function)
Digital terminal for connecting a dedicated
interface cable
One AA/LR6 alkaline battery
(NiMH and Li-ion batteries supported)
Approx. 54.3 x 72.9 x 44.2 mm /
2.1 x 2.9 x 1.7 in. (W x H x D)
Approx. 82 g / 2.89 oz.
* Excluding battery
85% or less
Map Utility
33