Logging The Route Traveled - Canon GP-E2 Bedienungsanleitung

Logging the Route Traveled

When the receiver is attached or connected to a camera that displays
the [GPS device settings] menu item, the receiver will geotag images
as you shoot, and periodically log the location information. Images can
also be tagged with the shooting direction.
With the EOS 7D, you cannot append the shooting direction data to the
images. (It cannot use the receiver's digital compass.)
With certain cameras other than the EOS 7D, you also cannot append
the shooting direction data to the images. (They cannot use the
receiver's digital compass.) For details, refer to the camera's instruction
manual or Canon Web site.
Setting the power switch to <LOG> will
automatically record location information
along the route traveled on the receiver
itself. (There is no need to connect the
receiver to the camera.)
The recorded location information can be
viewed on a virtual map. Logs can also
be used to geotag images at a later time
(p.29).
Map data ©2012 ZENRIN -
19