Warranty Terms; Extent Of Warranty; Processing Of Warranty Claims - Parkside PDMH 4500 A2 Bedienungs- Und Sicherheitshinweise

Warranty terms

The warranty period begins on the date of purchase.
Please retain the original receipt safely. This document
is required as your proof of purchase.
Should this device show any fault in materials or ma-
nufacture within three years from date of purchase,
it will be repaired or replaced – at our choice – by
us free of charge. This warranty is conditional on the
defective device and the proof of purchase (receipt)
being presented within the three year warranty pe-
riod, and that there is a brief written description of
the nature of the defect and of the date it arose.
If the defect is covered by our warranty, we will re-
turn the repaired device or replacement thereof. A
repair or exchange of the device does not extend a
new warranty period.

Extent of warranty

The appliance has been manufactured to strict quality
guidelines and meticulously examined before delivery.
The warranty applies to faults in material or manuf-
acture. This warranty does not apply to product parts
subject to normal wear and tear and which can the-
refore be considered as wear items, or to damage
to fragile parts, e.g. switches, storage batteries or
glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the instructions for use must be
followed strictly to constitute proper use of the pro-
duct. Purposes and practices which the instructions
for use warn of or advise against must be avoided
without fail.
This product is intended for private, non-commercial
use only. Any incorrect or improper use of the device,
use of force and changes not performed by our
authorized service branch will void the warranty.

Processing of warranty claims

Please follow the instructions below to ensure quick
processing of your claim:
96912_par_Druckluft-Meisselhammer PDMH 4500 A2_content_IT_PT.indd 43
Information about warranty and service processing
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The product number can be found on the type plate,
an engraving, the cover page of your instructions
(bottom left) or the decal at the back or bottom.
In the event of malfunctions or other defects, please
first contact the service department below by phone
or e-mail.
A product recorded as defective, along with the
proof of purchase (sales receipt) and a description
of the defect and when it occurred, can then be re-
turned free of charge to you to the service address
provided.
How to contact us:
GB
Name:
Website:
E-mail:
Phone:
Registered office:
IAN 96912
Please note that the following address is not a ser-
vice address.
Please first contact the service point named above.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
Note:
Visit www.lidl-service.com to download
this and many other manuals, product
videos and software.
C. M. C. GmbH
www.cmc-creative.de
service.gb@cmc-creative.de
0-808-189-0652
(standard German landline
rates apply)
Germany
GB/MT 43
03.06.14 15:07