Introduction; Intended Use; Features - Parkside PDMH 4500 A2 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these instructions for use / on the equipment:
Please read the instructions for use!
Note
Wear hearing protection!
Observe the warning and safety
instructions!
Caution! Explosion hazard!
Air chipping hammer
PDMH 4500 A2
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the instructions for
use and the safety advice below. Initial operation of
this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

The chipper is a compressed air operated tool for
versatile use. It is suitable e.g. for working in grooves,
chipping off tiles or plastering, wall breakthroughs,
cutting sheet steel, and chipping off bolts and rivets.
This tool is only suitable for indoor use. Keep these
instructions in a safe place. When passing this prod-
uct on to others, please also include all the documents.
Any use other than the intended is prohibited and
potentially dangerous. Damages resulting from
34 GB/MT
96912_par_Druckluft-Meisselhammer PDMH 4500 A2_content_IT_PT.indd 34
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as a
power source.
Wear hearing protection, dust mask,
safety glasses and protective gloves.
Compressed air hose
Dispose of packaging and device in
an environmentally-friendly way!
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer's
liability. This device has been designed for household
use and may not be used for commercial or industrial
purposes.

Features

Check that all the items are present and
that the product is in perfect condition
immediately after unpacking. Never use
the product if it is defective.
Air adjusting screw
1
Plug nipple
2
Trigger
3
Tension spring
4
Moil chisel
5
Flat chisel (universal chisel)
6
Rivet chisel
7
Slitting chisel (sheet metal chisel)
8
Corner chisel
9
Speciality oil for compressed air
10
03.06.14 15:07