Informations; Application; Massage Positions - Saneo Sense+ Bedienungsanleitung

All manuals and user guides at all-guides.com
Infor mations
Loading the SaneoSENSE +
•
Connect the cable end of the SaneoSENSE + to the mains
adapter and plug the mains adapter into a suitable socket.
The LED lights alternately.
•
E
The SaneoSENSE + battery is fully charged when all the
LEDs light up blue. This can take up to three hours.
•
After charging, unplug the AC adapter from the AC outlet,
and then disconnect the AC adapter from the AC adapter.

Application

•
Press the Power Switch once.
The product will start its kneading massage and heat therapy
for 15 minutes.
•
Press the heat button.
This time, the product will stop its heat therapy while the
kneading massage continues.
•
By pressing the button of direction change, the massage
balls change their direction of rotation.
•
Press the speed button to change the speed of rotation.
There are three speed levels which can be set by repeated
pressing of the speed button.
•
Press the Power Switch and hold for 3 seconds to turn the
product off.

Massage positions

7