Useful Information; Caractéristiques Techniques - Atlas Copco Lzb22-Rl-A008-11 Atex Sicherheitshinweise

Safety Information

Useful information

Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art pre-
ventive maintenance through its ToolCover contracts. For fur-
ther information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains technical information for all
hardware and software products, such as:
- Regulatory and Safety information
- Technical data
- Installation, Operation and Service instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available at:
servaid.atlascopco.com
For further information contact your local Atlas Copco repre-
sentative.
8
https://
© Atlas Copco Industrial Technique AB - 9836 7259 00
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
For more information, consult the website:
www.atlascopco.com/sds
Caractéristiques techniques
Indice IP
L'indice IP des moteurs pneumatiques se réfère au carter mé-
canique conformément à la norme IEC 60529. L'indice IP ne
couvre pas la résistance à la corrosion ou à d'autres liquides
autres que de l'eau douce potable.
Caractéristiques techniques
Référence
Modèle
Consommation d'air à la
vitesse à vide
Consommation d'air à la
vitesse à vide
Consommation d'air à la puis-
sance maxi.
Consommation d'air à la puis-
sance maxi.
Couple de freinage
Couple de freinage
Frein intégré
Matériau des pièces externes Stainless steel
Vitesse à vide
Puissance maxi.
Puissance maxi.
Couple de démarrage mini.
Couple de démarrage mini.
Rapport
Sens de rotation
Code de chargement de l'arbre b
Type d'arbre
Vitesse à la puissance maxi.
Couple de calage
Couple de calage
Couple à la puissance maxi.
Couple à la puissance maxi.
Type de palettes
Poids
Poids
Flexible d'alimentation
Flexible d'alimentation
Indice de protection
Flexible de sortie
Flexible de sortie
LZB22-RL-A008-11 ATEX
8411021960
LZB22-RL-A008-11
l/s
cfm
5.3 l/s
11.2 cfm
Nm
ft lb
No
770 tr/min
0.26 kW
0.35 hp
13.5 Nm
10 ft lb
Clockwise
Keyed
360 tr/min
14.2 Nm
10.5 ft lb
7.1 Nm
5.2 ft lb
Lubrication free
0.83 kg
1.83 livres
8 mm
0.3 pouces
IP66/IP68/IP69
10 mm
0.4 pouces