Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 - QUICK NETWORK SETUP
Login to the web viewer
1� Once the camera is connected to the network, start the eneo Site Manager
(download from www.eneo-security.com)�
A list of cameras connected to the local network is displayed�
2� By default, the camera is set to DHCP� If there is no DHCP server on the network,
the camera will switch to a default IP address after a while� In this case, add
only one camera at a time to the network to avoid conflicts due to identical IP
addresses� The default IP address of the network camera is 192.168.1.10�
3� Right-click on the device name in eneo Site Manager to open the context menu�
Use the Open Web Interface option to access the camera�
4� The Web Viewer login page opens in the web browser of your choice�
5� Enter the default access data once�
User name: admin
Password: admin
6� You must then change the password�
7� From now on, you can access the camera settings�
Note!
Screenshots may be shown in german, for questions contact the support.
12
Werbung
