Cleaning And Maintenance; Environmental Instructions And Disposal Information - Parkside PSH 3 A1 Betriebsanleitung

Initial use / Cleaning and Maintenance / Environmental instructions and ...
Put on the welding helmet with the help of the
headband . Press the adjustment buttons
5
to make the welding helmet tighter and the ad-
justment button
7
When adjusting, ensure that your head is placed
as far into the helmet as possible and that it sits
as close as possible to your face.
Set the appropriate darkening shade before the
welding procedure (see the following table).
The darkening shade may be manually adjusted
from 9 to 13 by twisting the darkening regula-
tor on the outside of the helmet.
9
ATTENTION! The darkening regulator
the setting position "grind". If the darkening
Table for setting the darkening shades
1.5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600
SMAW
MAG
TIG /
GTAW
MIG
(heavy)
MIG
(light)
PAC
PAW 4 5
SMAW: welding with coated electrodes
MIG (heavy): MIG welding heavy metals
MIG (light): MIG welding light metals and alloys
TIG / GTAW: welding with inert gases
MAG: welding with metal active gas
PAC: plasma cutting
PAW: plasma welding

Cleaning and Maintenance

Do not use any harsh cleaning agents to clean
the helmet casing
Never bring the UV filter
Clean the product with a soft, dry cloth, with a
cloth dampened with pure alcohol or with a
cloth dampened with disinfectant.
8 GB/IE
270752_Schweisshelm Automatik PSH 3 A1_content_FI.indd 8
6
, to fix the welding helmet.
has
9
Arc current (ampere)
8 9
8 9
8 9 10
9
9
6 7 8 9
.
2
into contact with water.
8
regulator is set to this position the automatic
9
darkening is deactivated.
Only use this setting when you do not wish to
use the welding helmet for welding. The auto-
matic darkening is then no longer active.
Check the light density before each use.
Test procedure: Bring the viewing panel closer
to an external light source with a value of more
than 40 W and examine whether or not the
screen darkens or illuminates.
To change the UV filter / the solar cell, remove
the 4 screws as in Fig. A (Art. No.: 1911,1912)
or push both snap-fit tabs out from each other
as in Fig. B (Art. No.: 1910).
10 11 12
10 11
11 12
10 11
10 11 12
10 11 12
10 11
Environmental instructions
and disposal information
Don't waste, recycle!
The device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not throw the auto-darkening welding helmet
into household rubbish, fire or water. If possible,
non-operational equipment should be recycled.
Contact your local retailer for information.
13 14
12 13
13
12 13 14
13 14
13
12
27.01.16 11:18
14