Product Manual for NTSK15P Wet and Dry Vacuum Cleaner
1. General Information
Thank you for choosing the NTSK15P Wet and Dry Vacuum Cleaner. This versatile vacuum is designed for both wet
and dry applications, making it ideal for cleaning various surfaces and environments. Please read this manual carefully
to ensure safe and effective use of the product.
2. Safety Information
- Electrical Safety: Ensure the vacuum cleaner is plugged into a suitable outlet. Avoid using extension cords.
- Water and Liquid Handling: Never use the vacuum for sucking up flammable or hazardous liquids. Always ensure that
the liquid level does not exceed the maximum fill line.
- Dust and Particulate Management: When using for dry applications, ensure to use the appropriate filter. Replace filters
as needed to maintain performance.
- Personal Protection: Use safety goggles and masks when cleaning hazardous materials. Ensure proper ventilation in
the working area.
- Children and Pets: Keep the vacuum cleaner out of the reach of children and pets during operation.
- Mains Supply: Only connect to the voltage specified on the appliance rating plate.
3. Product Specifications
- Capacity: 15 Liters
- Power: 1200 W
- Voltage: 230 V
- Frequency: 50 Hz
- Weight: 5.0 kg
- Dimensions: 350 x 350 x 540 mm
4. Setup and Installation
- Unboxing: Remove the vacuum cleaner and all accessories from the box. Ensure all components are intact and free
from damage.
- Assembly:
Attach the handle to the main body of the vacuum using the screws provided.
Ensure the filter is properly installed in the tank before use.
Connect the suction hose to the inlet on the machine until you hear a click.
- Location: Place the vacuum cleaner on a stable floor surface in an area where it can easily be operated. Ensure
adequate electrical access.
5. Operation
- Switching On: Plug in the vacuum cleaner. Turn the power switch to the ON position.
- Selecting Mode: Use the toggle switch to select between wet and dry operation.
- Usage: Move the vacuum cleaner slowly over the surface for optimal suction. Make sure to follow the manufacturer's
guidelines for the type of material being cleaned.
6. Cleaning and Maintenance
- Post-Use Cleaning: After each use, unplug the vacuum and empty the tank. Rinse with warm water if used for wet
applications.
- Filter Maintenance: Inspect and clean the filter regularly. Change the filter when it shows signs of damage or clogging.
- Exterior Care: Wipe the exterior of the vacuum with a damp cloth as needed to remove dust and debris.
7. Troubleshooting
- Vacuum Won't Start: Check the power supply and ensure the vacuum is plugged in.
- Weak Suction: Check the filter for clogs. Clean or replace if necessary.
- Excessive Noise: Inspect the vacuum for blockages or loose parts.
- Accidental Liquid Spillage: Ensure the inlet is properly sealed, and check the float for function.
8. Disposal
Please recycle the vacuum cleaner in accordance with local regulations. Do not dispose of it as regular household
waste. Refer to the manufacturer's guidelines for proper disposal of electrical waste.
9. Contact
For further inquiries, assistance, or customer service, please contact us at:
Email: info@ggmgastro.com
Phone: 0800 7000 220
Address: Weinerpark 16, 48607 Ochtrup, Germany
Thank you for choosing NTSK15P Wet and Dry Vacuum Cleaner. We hope it serves you well.
EN ENGLISH