Disposing; Warranty - Märklin 70391 Bedienungsanleitung

CV Meaning
40 Meaning Lighting
PoM*
41 Center setting for Arm 1
PoM*
42 Center setting for Arm 2
PoM*
*PoM programming can be done on the main track as long as it
is supported by the control device.
Setting and Calculating Addresses Greater than 255 (DCC):
Example: Address 1044 -> 1044 : 256 = 4.078125. The value before
the decimal point (4) is entered in CV 9. The value after the
decimal point (0.078125) is multiplied by 256 0.078125 x 256 = 20.
The calculated value of 20 must be entered in CV 1.

Disposing

Products marked with a trash container with a line
through it may not be disposed of at the end of
their useful life in the normal household trash. They
must be taken to a collection point for the
recycling of electrical and electronic devices.
There is a symbol on the product, the operating
instructions, or the packaging to this effect. The
materials in these items can be used again according to this
marking. By reusing old devices, materially recycling, or
Values
0 - 15 (15) 0 light off
Dimming 0-15,
whereby 15 = 100%
brightness
0 - 255 Setting of the middle
position for the arm
on all signals
0 - 255 Only with 70411 /
70412 Setting of the
middle position for the
2nd arm
recycling in some other form of old devices such as these you
make an important contribution to the protection of our
environment. Please ask your city, town, community, or county
authorities for the location of the appropriate disposal site.

Warranty

The warranty card included with this product specifies the
warranty conditions.
• Please contact your authorized Märklin dealer for repairs or
contact:
Gebr. Märklin & Cie. GmbH
Reparaturservice
Stuttgarter Str. 55 - 57
73033 Göppingen
Germany
 : +49 7161 608 222
E-Mail: Service@maerklin.de
9