Cleanmaxx 07407 Gebrauchsanleitung Seite 2

EN
Dear Customer,
We are delighted that you have chosen our spray mop. If you
have any questions about the product, contact the customer
service department via our website:
www.ds-group.de/kundenservice
Symbols
Danger symbol: Read through the associated safety
notices carefully and follow them.
Supplementary information
40°C delicate wash
Do not bleach
Do not dry in a tumble dryer
Do not iron
Do not treat with solvents
Important Notices
■ Keep the packaging material away from children and
animals. There is a danger of suffocation!
■ The product is suitable for wet cleaning of all kinds of smooth
surfaces (hard floors, stairs, etc.).
■ Make sure when cleaning laminate floors that not too much
cleaning liquid is sprayed onto the floor as otherwise the
laminate could swell!
■ The product is not a toy!
■ The product is designed for personal use only and is not
intended for commercial applications. The product should only
be used as described in the operating instructions. Any other
use is deemed to be improper.
■ Clean the cleaning cloth immediately after each use to prevent
germ formation.
■ Only ever dry the cleaning cloth in the air, and never use
a tumble dryer or a hair dryer to do this!
■ Use only original accessories in order to guarantee that there
is no interference that may prevent the product from working
and to avoid possible damage.
■ Protect the product from: heat sources, flames, sub­zero
temperatures, direct sunlight and impacts.
Items Supplied and Product Overview
Check the items supplied for completeness and the components
for transport damage. If you find any damage, do not use the
product but contact our customer service department.
Remove any possible films, stickers or transport protection from
the product.
L
Water residues in the water tank are attributable to quality
checks.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
07407_DE-EN-FR-NL_A4_V1.indb 2 07407_DE-EN-FR-NL_A4_V1.indb 2
Customer Service / Importer:
*) Calls to German landlines are subject to your provider's charges.
All rights reserved.
Before Initial Use
1. Insert the upper shaft (3) into the lower shaft (4) until you hear
it engage.
2. Plug the lower shaft into the shaft holder on the cleaning
foot (8) until you hear it engage.
3. Clean the product with a damp cloth and mild detergent
to remove any possible production residues.
Use
1. Remove the water tank and unscrew the lid from the water
tank (5).
2. Pour water and / or a cleaning agent into the water tank.
3. Screw the lid on the water tank. Make sure that the sealing
ring fits securely in the lid and does not stick out, press it into
the groove if necessary.
4. Insert the water tank into the mount on the spray head (6).
5. Attach the mop cloth with the hook­and­loop side under the
cleaning foot (8).
6. Mop in the usual way and if necessary press the spray trig­
ger (2) to make the surface to be cleaned damp with the aid
of the spray nozzle (7).
Cleaning and Storage
• Pull the mop cloth off the cleaning foot (8) and wash it in the
washing machine. Follow the instructions on the washing
label! Do not use any fabric softener as this can reduce the
absorbency of the cleaning cloth.
• If necessary, wipe the mop with a damp cloth and a little clean­
ing agent if required. Do not use any caustic or abrasive
cleaning agents or cleaning pads!
• Allow all parts to dry thoroughly before they are stored away.
• Store the product in a clean, dry, frost­free place that is not
accessible to children and animals.
Disposal
Dispose of the packaging material in an environmentally
friendly manner so that it can be recycled. If the product
is no longer going to be used, dispose of it in an environ­
mentally friendly manner as well.
✆
+49 38851 314650 *)
Operating Instructions
1 Handle
1
2 Spray trigger
2
3 Upper shaft
4 Lower shaft
5 Water tank
3
(approx. 400 ml)
6 Spray head
7 Spray nozzle
8 Cleaning foot with
mop cloth
4
5
6
7
8
Z 07407 M PE V1 0922 as
06.09.2022 14:32:22 06.09.2022 14:32:22