Hobby Aqua Timer pro Bedienungsanleitung Seite 7

Features:
∙ time-controlled switching of, for example, lighting, heating system, cooling system, as
well as sprinkler systems for terraria, humidifiers, nebulisers, flow pumps for aquaria,
ventilators, dosing and CO 2 systems
∙ 9 turn-on / turn-off times can be programmed
∙ shortest switching interval 1 second
∙ programming for control daily, on particular days, in blocks of days,
only weekdays, or only at weekends
∙ manual switchover of operating modes Automatic, Permanent ON and Permanent OFF
∙ LCD display for day of the week, hour, minute, second,
programmed switching times and operating mode
∙ maximum switching capacity 2,000 W ohmic load (e.g. light bulbs,
heating cables, etc.) or 1,000 W inductive load (e.g. devices with coils,
such as transformers, ballasts, etc.)
∙ 230 V / 50 Hz
∙ battery (type 1.2V 800mAH Ni-MH) to safeguard against loss of date in the event of a
power failure
∙ integrated child lock
∙ to be used only in enclosed rooms
1. Setting the time
1.1 Press and hold the „CLOCK" button and simultaneously use the „WEEK" button to
set the current day of the week.
1.2 Press and hold the „CLOCK" button and simultaneously use the „HOUR" button to
set the hours.
1.3 Press and hold the „CLOCK" button and simultaneously use the „MIN" button to
set the minutes.
1.4 Release the „CLOCK" button. The current time is shown in the display.
2. Setting the timer switching times
2.1 Press „PROG" to enter program mode for the switching times. „1 ON" is indicated in
the display (program number/switch-on time).
2.2 By pressing „WEEK" you can choose between individual days or blocks of days.
When „WEEK" is pressed for the first time, Mo,Tu,We,Th,Fr,Sa,So appears in the
display. In this case, the programmed switching times are activated daily. By pressing
„WEEK" a second time, it becomes possible to program the switching times on
particular days or blocks of days in the following sequence:
7