Bauknecht BLVM 8100 Benutzerhandbuch Seite 33

FUNCTION DETAILS
After selection of the desired function, the display will show further options and related details.
180°C
Zone 3
TEMPERATURE
Yes
Zone 2
PREHEAT
Cursor
To move between the different areas, turn the "Browse" knob: the cursor moves to the adjustable values,
following the order described above. Press button
"Browse" knob and confirm with button
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND SETTING
THE TIME
For correct use of the oven, when it is switched on for the first time you will have to select the desired
language and set the correct time.
Proceed as follows:
1. Turn the "Functions" knob to any position: the display will show the list of the first three available languages.
2. Turn the "Browse" knob to scroll the list.
3. When the desired language is highlighted, press
After language selection, the display will flash 12:00.
4. Set the time by turning the "Browse" knob.
5. Confirm your setting by pressing
SELECTING COOKING FUNCTIONS
180°C
TEMPERATURE
yes
PREHEAT
1. If the oven is off, turn the "Functions" knob; the display will show the cooking functions or associated
submenus.
N.B.: for the list and description of functions, see the specific table at page 36 and at page 37.
2. Within the submenus, browse the various options available by turning the "Browse" knob: the chosen
function is highlighted in white in the centre of the screen. To select it, press
3. The cooking settings are shown on the display. If the pre-set values are those desired, turn the
"Browse" knob to position the cursor at "Start" and then press
above to change them.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL
180°C --:--
TEMPERATURE COOK TIME
Conventional
No --:--
Start
PREHEAT END TIME
200°C --:--
TEMPERATURE COOK TIME
Conventional
No --:--
Start
PREHEAT END TIME
To change the temperature or output of the grill, proceed as follows:
1. Check that the cursor is positioned next to the temperature value (zone 1); press button
the parameter to be changed: the temperature values flash.
2. Set the desired value by turning the "Browse" knob and press
3. Turn the "Browse" knob to position the cursor at START and then press
4. The display indicates which shelf food should be placed on. Do as instructed and press
cooking.
The set temperature can also be changed during cooking by following the same procedure.
5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be
switched off by turning the "Functions" knob to 0 (zero), or cooking can be prolonged by turning the
"Browse" knob clockwise. When switched off, the display shows the cooling bar which indicates the
temperature inside the oven.
--:--
COOK TIME
Convection Bake
--:--
Start
END TIME
Zone 1
.
.
--:--
COOK TIME
Convection Bake
--:--
Start
END TIME
180°C
TEMPERATURE
Conventional
No
Start
PREHEAT
200°C
TEMPERATURE
Conventional
No
Start
PREHEAT
Zone 4
Zone 5
to select the value, change it by turning the
to select it.
180°C --:--
TEMPERATURE COOK TIME
Convection Bake
Yes --:--
Start
PREHEAT END TIME
; otherwise, proceed as indicated
--:--
COOK TIME
--:--
END TIME
--:--
COOK TIME
--:--
END TIME
to confirm.
GB31
.
to select
.
to start