Chicco FAST-IN Gebrauchsanleitung Seite 8

1B- 1C).
The adapters can be mounted in both directions: either
with the release button facing the street (Fig. 1D), or facing
the parent (Fig. 1E).
2. To install the CHICCO KORY / CHICCO FIRST-SEAT RECLINE
car seats insert the car seat's lateral connectors into the
previously mounted adaptors (Fig. 2-2A).
WARNING: The car seat on the stroller should be fixed only
and exclusively parent-facing.
To remove the car seat, press the buttons under the handle
on both sides (Fig. 2B) and pull upwards using the handle
of the car seat (Fig.2C).
CLOSING THE FRAME WITH THE ADAPTERS
3. The stroller frame can also be closed with the adapters
installed. To do so, press the two buttons on the adapters
(Fig. 3) and the frame will close by itself (Fig. 3A).
DISASSEMBLING ADAPTERS FROM THE STROLLER
AND/OR LULLAGLIDE
4. To remove the adaptors press the button and pull up (Fig. 4).
WARRANTY
The product is guaranteed against any lack of conformity
under normal use as specified in the instructions.
The warranty shall not therefore apply in the case of dam-
age caused by improper use, wear or accidental events. For
the duration of the warranty on conformity defects please
refer to the specific provisions of applicable national laws in
the country of purchase, where appropriate.
8