Seite 42
/ pre-installed filter cable / user manuals / 4 prefilters...
Seite 43
Place the washable prefilters into the four air inlets of your aair.
Seite 44
Recommendations Place the device at least 1m from walls and next to a potential leaking point (Windows). Refrain from covering the air inlet or air outlet of the device.
Seite 45
How to install screens in the aeris units: 1) The screen is tapered so that it will fit the intake. Hold the screen so that the metal magnets are visible and face out towards you and the ring faces up, then gently pull on the ring so it is parallel to the floor while the rest of the screen stays perpendicular: 2) Hold the screen by the ring and slide the top edge of the screen into the intake.