Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Fuse Of The Main Unit; Disposal; Technical Data; Main Unit - Toolcraft Rst-280 Bedienungsanleitung

Entlötstation
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

14.2 Replacing the fuse of the main unit

The fuse is integrated into the power connector at the rear of the product.
1. Switch the main unit off by flipping the power switch I/O into the position O.
2. Allow the hot air gun and soldering iron to cool down completely.
3. Disconnect the mains cable from the product.
4. Unlock the fuse compartment with a flat-headed screwdriver and pull out the fuse tray.
5. Replace the fuse with an equivalent one. Refer to "Technical data" for fuse data.
Tip:
Store a spare fuse in the spare fuse holder that is integrated into the fuse tray.

15 Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This sym-
bol indicates that this device should not be disposed of as unsorted municipal waste at the end of its ser-
vice life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from
unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as
well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by
end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad
provides the following return options free of charge (more details on our website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manufacturers
or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of
Germany.

16 Technical data

16.1 Main unit

Input voltage.................................................. 220 - 240 V/AC, 50 - 60 Hz
39
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2617831

Inhaltsverzeichnis