Assigning Custom Shortcuts; Soldering Iron; Operation Modes; Operating The Soldering Iron - Toolcraft Rst-280 Bedienungsanleitung

9.10 Assigning custom shortcuts

By assigning custom shortcuts to the settings buttons, you can quickly switch to presets during operation. You can
assign shortcuts to any of the settings buttons.
1. Adjust the temperature and the air volume.
2. Save the shortcut by pressing and holding a settings button (1/2/3) until the values on the display flash once.
3. Use the shortcut by pressing the settings button to which the shortcut is assigned.

10 Soldering iron

10.1 Operation modes

Working mode
In working mode, the soldering iron is fully operational.
Standby mode
In standby mode, the soldering iron maintains a temperature of 200 °C.
Reactivate the working mode by pressing any of the settings buttons of the soldering iron.

10.2 Operating the soldering iron

1. Place the soldering iron into the soldering iron stand.
2. Switch the main unit on by flipping the power switch I/O to the position I.
3. Wait for the main unit to start up.
à
The display shows OFF.
4. Switch the soldering iron on by pressing the soldering iron power button SOLDERING IRON ON/OFF.
à
The soldering iron heats up.
à
The display shows the actual temperature.
5. Wait for the temperature value to stabilize on the display.
6. The soldering iron is ready for use.
7. After use, switch the soldering iron off by pressing the soldering iron power button SOLDERING IRON ON/OFF.
8. After use, switch the main unit off by flipping the power switch I/O to the position O.
34