Locking Operational Settings; Activating Nozzle-Cooling; Setting Temperatures; Setting Air Volume - Toolcraft Rst-280 Bedienungsanleitung

6. After use, switch the main unit off by flipping the power switch I/O to the position O.

9.3 Locking operational settings

Lock all settings to prevent accidental modifications to settings. The lock is maintained even after the main unit is
switched off.
Menu entry
/Loc
/Loc
1. Press and hold the settings buttons 1 and 3 at the same time until the display shows SET.
2. Navigate to the menu entry using the settings buttons 1 and 3.
3. Use the menu selector buttons TEMP to adjust the value.
4. Save the entry by pressing the settings button 2.
Note:
The locking function does not prevent users from entering the menu and making changes.

9.4 Activating nozzle-cooling

The nozzle-cooling function allows you to quickly cool the nozzle of the hot air gun.
Preconditions:
a
The hot air gun is operating.
1. Press the settings button 1 to activate nozzle-cooling.
à
The display shows C-L to indicate nozzle-cooling.
Important:
If you assign your own shortcut to the settings button 1, then the nozzle cooling function does not function as de-
scribed.

9.5 Setting temperatures

You can adjust the hot air gun temperature while the hot air gun is off or operating.
1. Use the selector buttons TEMP to set a temperature value. Press and hold the buttons to fast-adjust the temper-
ature value.
à
If you release the selector button, the temperature value is stored.

9.6 Setting air volume

1. Rotate the air volume dial to adjust the air volume.
à
The display shows the air volume output as a percentage value.
32
Value
ON
OFF
Description
The settings are locked.
The display shows the lock symbol.
The settings cannot be modified.
The settings are unlocked.
The settings can be modified.