Display; Setting Up; Mounting The Hot Air Gun Holder - Toolcraft Rst-280 Bedienungsanleitung

Component
13 Hot air gun
14 Air volume selection dial
15 Menu selector buttons TEMP for hot air gun Navigate menus and make selections.
16 Hot air gun holder

6.2 Display

A B
J
I
H
G
F
Left side: Hot air gun
Right side: Soldering iron
Indication
A Indicator REAL
B Indicator SET
C Temperature unit
D Actual soldering tip temperature
E Preset temperature
F Target air volume
G Fan indicator
H Settings lock indicator
I Actual hot air temperature
J Bar indicator of heating power

7 Setting up

7.1 Mounting the hot air gun holder

1. Screw the hot air gun holder to the left side of the main unit using the supplied screws.
Description/Function
Lift the hot air gun from the holder to activate it.
Place the hot air gun onto the holder to deactivate it.
Set the air volume of the hot air gun.
C
D
E
Description/Function
Indicator shows if the settings menu is deactivated.
Indicator shows if the settings menu is activated.
Indicator shows if the fan runs.
Indicator shows if the operation settings are locked.
More bars indicate a higher temperature.
29