Soldering Iron; Hot Air Gun; Accessories; Replacement Parts - Toolcraft Rst-280 Bedienungsanleitung

5.8 Soldering iron

■
Always place the soldering iron in the stand/holder if you do not use it.
■
Do not leave the soldering iron unattended if switched on.
■
Do not touch the hot soldering iron tip to prevent burns.
■
Always keep the soldering tip away from the power cord.
■
Switch the soldering iron off if you do not use it for extended periods.

5.9 Hot air gun

■
Heat can ignite combustible materials and result in fire.
– Keep away combustible materials such as flammable gases, vapours, or dust.
– Remember that heat can be conducted to combustible materials which are out of sight.
– Do not leave the hot air gun unattended if switched on.
■
Do not point the flow of hot air at people or animals as this may cause burn injuries!
■
Do not touch the hot air heat gun to prevent burns.
■
Do not attempt to remove a tip from the airgun when it is hot to prevent burns.
■
Always place the hot air gun on the provided holder if you do not use it.
■
Make sure that there is enough space in the direction from which the hot air nozzle discharges hot air. The hot
air may cause a fire if there is not enough space!
■
Never use the workstation to heat up liquids or gases.
■
Never point the flow of hot air at the main unit, mains cable, hose or other parts.

5.10 Accessories

■
Accessories and components that are not compatible with the product can damage the product or result in haz-
ards. Only use the supplied components and accessories.

5.11 Replacement parts

■
Only use replacement parts designed for the product to prevent hazards.
27