Operating Instructions For Download; Intended Use; Delivery Contents; Description Of Symbols - Toolcraft Rst-280 Bedienungsanleitung

1 Operating Instructions for download

Use the link www.conrad.com/downloads
structions (or new/current versions if available). Follow the instructions on the web page.

2 Intended use

The product is a rework station. The product is intended to be used for de-soldering and soldering surface-mounted
electronic components.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties
only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

3 Delivery contents

■
Main unit
■
Soldering Iron
■
Soldering iron stand
■
Ground wire
■
Hot air gun holder
■
4x hot air nozzles
■
Mains cable
■
Operating instructions

4 Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
24
(alternatively scan the QR code) to download the complete operating in-