Minix NEO J50C-4 Kurzanleitung Seite 5

Overview
Power LED- The LED glows blue when NEO J50C-4 is on.
Power Button - To power
the power button for 1-2 seconds until the power LED glows.
To power off the NEO J50C-4,
button for 8 seconds.
3.5mm Audio
input/output
Gigabit Ethernet Port - Connect
wired internet
DC 12V Power-in
adapter. NEO J50C-4 requires
however the included
support for other
such as an external
on the NEO J50C-4,
Jack + S/PDIF Port - Connect
device such as microphone
access up to 1000Mbps.
Jack - Connect
power adapter
external
hard
press and hold the power
an Ethernet cable for
the included
approx.
devices attached
drive.
press and hold
an external
or AV receiver
12V power
IA to operate,
provides 3A to ensure
to NEO J50C-4,
audio
etc.