Inhaltsverzeichnis
Werbung
MAX / MIN memory function:
The thermometer automatically memorizes the highest
(MAX) and the lowest (MIN) temperature from the time
of inserting the battery or from the time of deleting the
memory (RESET).
To request the memory function, press the "MODE" but-
ton. Each pressing changes to the next mode (MAX >
MIN > "present" > MAX ...).
By pressing the "RESET" button the currently displayed
memory function (MAX/MIN) gets deleted.
Maintenance and Care
Apart from occasionally cleaning the device and the
changing of battery, maintenance is not necessary.
To clean the device only use a soft, damp cloth without
any abrasive or chemical cleaning agents.
Technical Specifications
Operating voltage:
Batteries:
Measuring range indoors:
Measuring range outdoors: -50 °C to +70 °C
Cable length of sensor:
12
1.5 VDC
1 x Type AA
-10 °C to +50 °C
approx.. 3 m
Please clean the installation surface with a grease-dis-
solving, non-abrasive and/or chemical cleaning agent.
The sensor is splash-proof and can be attached with the
screw, included in the delivery.
Do not place the thermometer around the
area of an airbag, since this could cause
injuries in the case of the airbag being acti-
vated. Installation around the windscreen
area should also be avoided.
Inserting/Changing of Batteries
A round cell type AA is included in the delivery, to oper-
ate the thermometer.
To insert and/or change the batteries, you do the follow-
ing:
- Slide the battery compartment to sideways, in the
direction of the arrow.
- Remove the used battery and now place the new bat-
teries with correct polarity into the battery holder.
Note the polarity signs in the battery compartment:
9
Werbung
Inhaltsverzeichnis
