Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha YRS-2000 Bedienungsanleitung Seite 63

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 170
■ INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
B)INPUT TRIM
.
TV/STB
ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
VCR
ANALOG;;;-3.0dB
DVD
DIGITAL;;-3.0dB
AUX
DIGITAL;;-3.0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO INPUT
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select VCR ANALOG to adjust the level of audio and
video signals input at the VCR AUDIO INPUT jacks
of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX DIGITAL to adjust the level of audio and
video signals input at the AUX OPTICAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
p
■ INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(e.g., DVD) to select the component you want to change
the name for and perform the following procedure.
C)INPUT RENAME
DVD ->
p
[ ]/[ ]:Position
[ ]/[ ]:Character
[ENTER]:Return
1
Press
/
to place the _ (underscore) under
the space or the character you want to edit.
The _ (underscore) flashes.
ENTER
2
Press
/
to select the desired character.
• You can use up to 8 characters for each input.
• Press
to change the character in the following
order or press
to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
ENTER
3
Repeat steps 1 to 2 to rename each input.
4
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
ENTER
MANUAL SETUP
DVD
61
En

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis