Usb Storage Device/Hdd; Basic Operations - Pioneer N-30AE Bedienungsanleitung

> Before Start > Part Names

USB Storage Device/HDD

Playback
1
2
12
> Install > Initial Setup
a
b
> Playback

Basic operations

You can play music files by connecting a USB storage
device or HDD (hard disk drive) to the USB port on the front
c
or rear of the unit.
0 The USB port on the front supports a maximum 5 V/0.5 A
power supply. If the HDD requires more than this,
d
connect to the USB port (maximum 5 V/1 A) on the rear
of the unit.
1. Turn the unit on.
2. Press USB FRONT or USB REAR.
e
f
3. Plug your USB storage device or HDD into the USB port
on the front or rear.
4. Folders and music files are displayed on the display
when loading is complete.
5. Select the folder or music file with the cursors (b) of the
remote controller and press ENTER (d) to confirm. To
return to the previous display, press RETURN (e).
6. Use play buttons (f) to stop play or choose tracks to play.
0 The display of album name, artist name, and album art is
supported with MP3/WMA/Apple Lossless/FLAC/AAC/
Advanced Setup | Firmware Update | Others
USB Front
USB
No Storage
USB Front
USB
USB Storage
E
N