RUNNING BELT
LUBRICATION
Lubricating under the running belt will ensure superior performance & extend its life
expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, &
repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication:
•
Lift one side of the running belt & feel the top surface of the running deck.
•
If the surface is slick to the touch, then no further lubrication is required.
•
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant:
•
Lift one side of running belt.
•
Pour some lubricant under the centre of the running belt on the top surface of the
running deck.
•
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute
lubricant.
NB/ Do Not Over Lubricate Running Deck. Any Excess Lubricant That Comes Out
Should Be Wiped Off.
Lubricant
[ UK ]