RONDELL RDE-1118 Betriebsanweisung Seite 26

REGULAR MAINTENANCE OF THE COFFEE MACHINE
Removal/Installation of Main Parts
of the Coffee Machine
Figure 19 illustrates the specifics of removing/installing
the main parts of the coffee machine.
Attention: when reinstalling the brewing unit (13) in
the correct position, you will hear a characteristic click-
ing sound of the lock. If you can't hear it, remove the
brewing unit again and reinstall it. (When installing the
Do not use a dish-washing machine for cleaning the removable parts!
Service Item
Brewing Unit 1. Remove the brewing unit, rinse it with running water
(13) from the top side, remove the coffee grounds from the
surface of the piston filter. It is suggested to clean by
hand every 3 days! Do not remove the lubricating oil on
the bottom and middle side of the brewing unit.
Milk Frother 1. Promptly clean the milk frother and milk container
and Milk after each milk frothing preparation. Cleaning method:
Container pour clean water into the milk container and use the
milk frothing function for direct cleaning.
2. Remove and rinse the milk container each day after
use.
Drip tray (11) Take out the drip tray and the used coffee grounds
and used container every day after use, rinse them with running
coffee grounds water, and then wipe. The service interval is no more
container (12) than two days!
Water tank (2) Rinse with running water every 3 days.
Coffee beans Clean the coffee bean container weekly, please use a
container (5)/ soft, dry cloth to wipe off the coffee oil/the residues
coffee grinder. inside.
If a lot of coffee oil has formed in the bean container,
it means that there may also be a lot of oil inside the
coffee grinder, clean the coffee grinder in a timely
manner if it does not work properly.
Ground Coffee It is recommended to open the right door every week,
Dispensing remove the brewing unit and clean the ground coffee
Channel dispensing channel over the original location of the
brewing unit with a soft cloth.
* - use in accordance with the recommendations of the manufacturer of cleaning products!
brewing unit (13), align the ledges at the base of the
brewing unit with the corresponding slots in the coffee
machine, then slide it until you hear the characteristic
clicking sound).
Attention: Check if the water tank is at the same level as
the top surface of the coffee machine. If not, push on the
water tank until it fits into place completely.
Daily maintenance is important to ensure durability and
excellent taste.
Maintenance Methods
26
Other
You can use a professional cleaning tablet to clean
the brewing unit from coffee oils* – remove the
brewing unit from the coffee machine and place the
cleaning tablet in the ground coffee compartment.
Reinstall the brewing unit in its original position and
prepare a large espresso cup (set the maximum
volume). Then remove the brewing unit and clean
any residues manually.
You can use a professional cleaning tablet
to clean the coffee grinder from coffee oils/
residues* – place the cleaning tablet in the bean
container, prepare an espresso cup (set the
maximum grinding amount). Then remove the
brewing unit and clean any residues manually.