Making Cappuccino - Rondell Rde-1118 Betriebsanweisung

3. Adjust the amount of ground coffee and its volume during
the preparation of the beverage, while the values of the
adjustable variables will be shown on the control panel
display (7).
During coffee grinding (the «g» symbol will be shown in the top
right corner of the screen), press the «+» or «-» button to adjust
the amount of ground coffee in grams. During coffee brewing
(the «ml» symbol will be shown in the top right corner of the
screen), press the «+» or «-» button to adjust the brewed cof-
fee›s volume in milliliters. During water dispensing (the «ml»
symbols are shown in the top right corner of the screen), press
the «+» or «-» button to adjust the hot water›s volume in millili-
ters. Press the «х2» « » button to prepare 2 cups of coffee.
Press the «Exit» « » button to force-terminate the process.
Dispensing Hot Water
1. Install a suitable cup on the metal grate of the tray (11) and
adjust the height of the coffee spout (9) (fig. 6).
2. Press the «Hot Water/Milk» button «
ing hot water (see fig. 9).
3. When the desired volume of hot water in the cup is reached,
press the «Exit» button «
the process. The maximum volume of hot water to be dis-
pensed is 250 ml.
Note: The hot water supply will stop automatically when its vol-
ume in the cup reaches 250 ml.
Making Hot Milk
1. Place a suitable cup onto the grate of the metal drip tray (11)
and adjust the height of the coffee spout (9) (fig. 10).
2. Prepare the milk container. Insert one end of the tube (17)
into the container cover (15).
Pour milk into the chamber (16) and close the cover. Insert the
second end of the tube (17) into the frother's (8) hole (fig. 10).
Note: If the milk container's volume is insufficient, you can use
a larger container. In this case, insert the milk delivery tube tip
(18) into the frother's (8) hole, and let the free end of the tube
hang into the milk container.
3. Press and hold down the «Hot Water/Milk» «
more than 3 seconds to start heating. The control panel›s
display will show the countdown timer for the heating pro-
cess in seconds (the «S» symbol is displayed in the top left
corner) (fig. 9).
After the heating process is completed, the hot milk will start
being dispensed.
You can control the hot milk dispensing time using the
countdown timer.
» to start dispens-
» on the control panel to finish
» button for
22
Note: Hot milk dispensing will automatically stop after
60 seconds.
4. When the desired volume of hot milk in the cup is reached,
press the «Exit» « » button on the control panel (7) to
finish the process.

Making Cappuccino

1. Place a suitable cup onto the grate of the metal drip tray (11)
and adjust the height of the coffee spout (9) (fig. 10).
2. Use the milk container or use a separate container for milk
as described in the previous section.
3. Press the «Cappuccino/Latte» «
preparation (fig. 11).
4. During the beverage preparation, adjust the amount of
ground coffee, its volume, and the frothing time accord-
ing to your preferences. The adjustable values will be
displayed in digital format on the display of the control
panel (7).
During coffee grinding (the «g» symbol will be shown in the
top right corner of the screen), press the «+» or «-» button
to adjust the amount of ground coffee in grams. During milk
frothing (the «S» symbol is displayed in the top left corner of
the screen), press the «+» or «-» button to adjust the frothing
time in seconds.
During coffee brewing (the «ml» symbol will be shown in the top
right corner of the screen), press the «+» or «-» button to adjust
the brewed coffee›s volume in milliliters.
Press the «Exit» « » button to force-terminate the pro-
cess.
Making Latte
1. Place a suitable cup onto the grate of the metal drip tray (11)
and adjust the height of the coffee spout (9) (fig. 10).
2. Use the milk container or use a separate container for milk
as described in the previous section.
3. Press and hold down the «Cappuccino/Latte» «
for more than 3 seconds to start preparation (fig. 11).
4. During the beverage preparation, adjust the amount of
ground coffee, its volume, and the frothing time according
to your preferences. The adjustable values will be displayed
in digital format on the display of the control panel (7).
During coffee grinding (the «g» symbol will be shown in the top
right corner of the screen), press the «+» or «-» button to adjust
the amount of ground coffee in grams.
During coffee brewing (the «ml» symbol will be shown in the top
right corner of the screen), press the «+» or «-» button to adjust
the brewed coffee›s volume in milliliters.
» button, to start
» button