Werbung
ENGLISH
Bl.O. Gobo Change
"Blackout while changing the gobos": while gobos are changing the projector can cut off the output to
obtain a special effect.
Select "Bl.O. Gobo Change" and press ENTER
Use DOWN / UP buttons to select:
No: output stays on during gobo changes.
Yes: output shuts off during gobo changes.
Press the ENTER button to save.
To return to a previous menu, press the MENU button.
Display Settings
This submenu contains display related settings
Press the MENU button and select the "Display Settings" submenu.
Display Inverse
The projector can be fixed/used in upward
position or hung in upside-down position. To
make reading of the display easier, you can turn
it over 180°.
No: Display readable while the projector is in
upward position.
Yes: Display readable while the projector is in
upside-down position.
Select "Display Inverse" and press ENTER
Use DOWN / UP buttons to select Yes or No.
Press the ENTER button to save.
To return to a previous menu, press the MENU
button.
Notice
an alternative shortcut for this
function: press the UP & DOWN
buttons together.
Backlight Auto Off
No: display is always lit.
Yes: display turns dark when not used for
some time.
Select "Backlight
ENTER.
Use DOWN / UP buttons to select Yes or No.
Press the ENTER button to save.
To return to a previous menu, press the MENU
button.
Backlight Intensity
Used to set the intensity of the display
backlight.
Select "Backlight Intensity" and press ENTER.
Use DOWN / UP buttons to change the intensity between 1 and 10.
Press the ENTER button to save.
To return to a previous menu, press the MENU button.
Temperature Unit
The display can show temperature either in °C (Celsius) or °F (Fahrenheit)
°C: Temperature is shown in Celsius.
°F: Temperature is shown in Fahrenheit.
Select "Temperature Unit" and press ENTER.
Use DOWN / UP buttons to select °C or °F.
Press the ENTER button to save.
To return to a previous menu, press the MENU button.
BRITEQ
®
Auto Off" and press
7/79
OPERATION MANUAL
BTX-180LS
Werbung
