Engel MD60F Bedienungsanleitung Seite 5

Any switches and lead wires for other electrical
wiring between your fridge and battery (other equipment sometimes generates high voltage
pulses which may cause defects in the fridge power supply)
BATT
WIRE GAUGE IS IMPORTANT
Connect your fridge to battery by use of the following wire :
Distance Between
Refrigerator And Battery
Less than 6m(19ft.)
From 6m(19ft.)over to 10m(32ft.)
More than 1Om(32ft.)
(Not recommended,too Ong)
WRONG
-IMPORTANT=
* Green power light
controlled to meet your selected
on. (Power light failure indicates a defective power source or reversed polarity in the DC
connection)
NOTE : In case of green light on and compressor
with fridge switched on to ensue sufficient voltage.
* When not using the fridge, check the fuse in DC cord.
ELECTRIC
REF
WRONG
TO AVOID
AWG#10/5.3mm2
BATTERY CHARGER
REF
OR AC/DC CONVERTER
indicates thermostat
Freezer temperature
equipment
EQUIPMENT
BATT
"VOLTAGE DROP
Wire gauge
DCI 2VoIt series
ETC
operation. Compressor
requirements
not operating.
5
should not be shared
GOOD
DC24VoIt
AWG#16/1 25mm2
AWG#14/2.1mm2
AWG#12/3.3mm2
REF
BATT
GOOD
activity is automatically
whilst unit is switched
Check voltage
with the
series
at battery