Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Einbau- und Wartungsanleitung • Installation and maintenance Instructions
Instructions de montage et de entretien • IIstruzioni di montaggio e
1
Einbau • Installation • Installation • Installazione
max. 16 bar / 25 bar
min. 0,7 bar
2
Inbetriebnahme • Commissioning • Mise en service
Messa in servizio
Weitere Inbetriebnahme und Einstellung des Feinregulierventils in Abhängigkeit vom installierten Steuer- oder Pilotventil
Further commissioning and setting of fine regulation valve depends on fitted control or pilot valve
Mise en service et ajustage de la vanne de réglage précis reste dépendant de la vanne de contrôle
La messa in servizio e la regolazione della valvola di regolazione fine dipendono dalla valvola di controllo o valvola pilota
installata.
max. 80 °C
Steuer- oder Pilotventil montieren
Fit a control or pilot valve
Installer une vanne de contrôle
Montare una valvola di
controllo o una valvola pilota
DN80 - DN450
BV300
manutenzione
DN50 + DN65

Werbung

loading

Inhaltszusammenfassung für Honeywell BV300

  • Seite 1 BV300 Einbau- und Wartungsanleitung • Installation and maintenance Instructions Instructions de montage et de entretien • IIstruzioni di montaggio e manutenzione Einbau • Installation • Installation • Installazione max. 80 °C ❶ ❷ max. 16 bar / 25 bar min. 0,7 bar ❸...
  • Seite 2 ❻ Automation and Control Solutions Honeywell GmbH Manufactured for and on behalf of the Environmental Hardhofweg and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland 74821 MOSBACH by its Authorised Representative Honeywell GmbH GERMANY MU1H-1332GE23 R0812...