Using The Remote Control Unit; Dry Mode - Blaupunkt Arrifana 15 Bedienungsanleitung

USING THE REMOTE CONTROL UNIT

COOLING MODE

Press the ON/OFF button to turn the
appliance on.

Press the MODE button to
icon.

Set the temperature using  or  button.

To set fan speed press the FAN button repeatedly until the required speed
is selected (HIGH, MED, LOW, AUTO).
NB: In COOLING mode the appliance automatically removes excess moisture
from the atmosphere.
NB: In COOLING mode, the exhaust hose must be connected to allow warm air
to be expelled from the room being cooled.

DRY MODE


When used as dehumidifier only, keep the
air exhaust hose disconnected.

Press the ON/OFF button to turn the
appliance on.

Press the MODE button to select
icon, the fan speed will always be at AUTO and cannot be adjusted in DRY
mode.
FAN ONLY OPERATION MODE

Press the ON/OFF button to turn the
appliance on.

Press the MODE button to

To select fan speed, press the FAN button
repeatedly until the requires speed is
selected (HIGH, MED, LOW). Fan speed AUTO can not be selected.
NB: In FAN mode, the exhaust hose does not need to be connected.
ARRIFANA 15
www.blaupunkt.com
select
select icon.
21