Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
• Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 port or
• Device with a free Thunderbolt™ 4 port
Package content
• External enclosure M.2
• Cable USB-C™ male to USB-C™ male, length ca. 15 cm
• 1 x thermal conductive pad
• 1 x heat sink
• M.2 mounting material
• Screwdriver
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Avoid anti-static electricity when installing the SSD
Hardware Installation
1.
Open the housing.
2.
Therefore, slide the switch on the back to the open symbol and push the
inside out forward.
3.
Now you plug your M.2 SSD into the slot.
4.
Fix the module with the help of the screws.
5.
For better cooling of the SSD, you can use the thermal cooling pad and the
heat sink.
6.
Place one of the thermal conductive pads in the frame.
7.
Now place your SSD on the thermal pad inside the frame.
8.
Now place another thermal pad on the SSD.
9.
Now place the heatsink in the frame and press it a little to make sure it is
correctly in the frame.
10. Screw the heat sink and frame firmly with the help of the four screws.
11. Close the enclosure.
12. Connect the USB cable with the enclosure and a free USB port of your
computer.
-3-
Werbung
