heicko B24 Serie Einbau- Und Bedienungsanleitung Seite 21

Press „Up"
Start from the
lowest position
The upperlimit positioncan be(minimally) adjusted
by thefunction„Adjustment o f the upperlimit
position"
b Manual settin of theu
Start from the Press„Up"
lowestposition
xl
...thenlet go of P2 .thenpressP2andhold,press„Down"
and the motor will and wait for 6 seconds
confirm 2x
c) Automatic setting of the upper limit position and manual setting of the lower limit position with setting device HR130020
Start from the lowest
Press„Up"
position
d) Manual setting of the upper limit position and automatic setting of the lower limit position via setting device HR130020
Press„Up"
Start from the
lowestposition
Both limit positions
are now set and
saved
Hangingmovesto the
upperrabbet.
Bothlimitpositionsare now set and
er and lower limit osition via settin
xl
Hangingmoves
upwards.
until motor
confirms lx
xl
Hangingmovesto the
upper rabbet.
Hanging moves
upwards
until the lower rabbet and the
.then automatically
downwards
saved.
device HR130020
.stopat yourdesiredupper
limitposition.
.stopat yourdesiredlower
limitposition.
.thenautomatical y stop at your desired lower
downwards limit position
stop at your desired upper
limitposition
motor stops
-21-
.thenautomatical y
until the lower
rabbet
and stops in the upper limit
position- slightlybelowthe
upperrabbet.
.thenpressP2 andhold,press„Up"
and wait for 6 seconds
confirms lx
.thenpress ..thenletgo of P2 andthe
„Down"
motor will confirm 2x
then press P2 and hold, press
„Down" and wait for 6 seconds
until motor confirms
.thenlet go of P2 andthe
motor will confirm 2x.
..thenpressP2 andhold,press„Up"andwaitfor
6 seconds until motor confirms lx
then press .thenlet go of P2 andthe
„Down" motor will confirm 2x
upwards
until motor
lx.
6 Sec