Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Symbols Explanation - Amazonbasics B07Msn639J Bedienungsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
• The use of a mixture of different types or brands of battery, or of used and new batteries even
of the same brand or type, may result in bums, leakage, explosion, or fire. When replacing the
batteries, use new batteries of the same types and brands.
• Remove the batteries as soon as they become run down. Otherwise, the batteries may leak
and damage the device.
• Do not apply solder directly to the terminals of a battery. Soldering batteries is dangerous,
because the heat will melt the insulator, creating an internal short-circuit, and leading to heat
generation, explosion, and fire.
• Remove the batteries when the device will not be used for a long time {excluding emergency
devices) to prevent leakage. Put the removed battery into a case individually and be careful not
to short-circuit.
• If the battery leaks and its electrolyte comes into contact with skin or clothes, wash the contact
area with clean water. If battery electrolyte gets into the eye, flush immediately with clean water
and consult a doctor immediately.
• Turn off battery-powered devices when not in use to prevent leakage.
• Do not remove or damage the battery label. Removing or damaging the label makes the battery
easier to short circuit, and may result in leakage, overheating or explosion.
• Use the battery within the recommended date printed on the label.
• Always insert batteries correctly with regard to polarity (+ and –) marked on the battery and the
product.
• Exhausted batteries should be immediately removed from product and properly disposed.

Intended Use

• This product is intended for collecting trash in a touchless manner that prevents spreading of
germs and bacteria.
• This product is intended for household and office use only. It is not intended for commercial
use.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with
these instructions.

Symbols Explanation

This symbol stands for "Conformité Européenne", which declares "Conformity
with EU directives, regulations and appplicable standards". With the CE-
marking, the manufacturer confirms that this product complies with applicable
European directives and regulation.
This symbol stands for "United Kingdom Conformity Assessed". With the
UKCA-marking, the manufacturer confirms that this product complies with
applicable regulations and standards within Great Britain.
5
Inhaltsverzeichnis
loading

Inhaltsverzeichnis