Werbung
HmIP-HAP-B1
Scan the QR code (B) on the back of the
access point if prompted to do so by the app.
Alternatively, you can also enter the access
point's device number (SGTIN) (B) manually.
If your access point's LED is a solid blue,
confirm this in the app.
If the blinking behaviour of the LED is different, follow the instructions in the app or refer to section
"10.4 Error codes and flash sequences".
The access point will then be registered on the server. This can take a few minutes. Please wait.
If registration is successful, press the System button on your access point to confirm.
The teach-in process is then carried out.
The access point is now set up and ready to use immediately.
50 - English
Werbung
